Hi there all,
I am in process of peddling off a batch of Studebaker Conestoga and station Wagon trim. Many of those pieces I was able to ID from the parts books. But i have several that I cannot exactly determine and so I am asking for those knowledgeable folks here to help if you can. I'm trying to get these parts to folks who need them!
ITEM A
These two pieces seem to fit together. One iece is 26 and the other is 25-1/2 inches long; about 5/8" wide. One end is "outdented" to allow the adjacent piece to slip into it.
-------------------------
ITEM B
These look like door panel connecting strips. They are both 41-1/2 inches long
-------------------------
ITEM C (two pics)
This piece is 40-1/2 inches long, stainless and with screw holes at 6 incj locations, it is about 1/2 x 1" and hs turned down ends
-------------------------
ITEM D (two pics)
These 3 stainless pieces are 39-1/4 inch long and still have some clips on them. I think they are for top of the door upholstery panels. They have a slight curve along the top of their length. Your thoughts please
-------------------------
ITEM E
This piano type hinge is 41-1/2 inches long and about 2 inches wide; holes every 5-3/4 inches
-------------------------
ITEM F
This 52 inch long piece of stainless is 3/4 wide and curved along its length. It still has 4 clips on the backside which are fitted into the channel of the stainless.
-------------------------
ITEM G (two pics)
These two pieces of trim where part of a batch of Conestoga and Station Wagon trim I acquired. I'm just not sure where they fit on a Conestoga or Station Wagon. The two pieces fit together for sure. They measure about 72± inches along their curving length. The trim is about 1-1/2 wide. They have pretty big clips that are on the backside for mounting.
Well, thanks for looking this stuff over and any help you can offer.
Henry Votel
Forest Lake, MN
Email: gudim2008@gmail.com