parts for sale, trim, O/d tranny, doors etc.

Buy-Sell-Trade, Wanted, Q&A, anything Conestoga!

Re: parts for sale, trim, O/d tranny, doors etc.

Postby junk » 2009 Nov 05 Thu 9:33 pm

OK, Here's the latest update on this. I grabbed more pictures. The 1st picture is the belt line trim without the hatch pieces correct. I included pictures of the hatch trim.

I included pictures of the interior windshield trim. They will need sand blasted, but all 3 pieces are there. The drivers one is rusty on the back. The drivers windshield post was completely rotten.

Tail lights are there, but rough. Housings are cracked lenses are trashed. Rear bumper is not too bad.

Conestoga script is about 3/5ths there.

Any other parts you guys looking for?
Attachments
IMG_6745.JPG
IMG_6745.JPG (92.6 KiB) Viewed 18776 times
IMG_6739.JPG
IMG_6739.JPG (86.24 KiB) Viewed 18774 times
IMG_6738.JPG
IMG_6738.JPG (106.52 KiB) Viewed 18774 times
junk
 
Posts: 21
Joined: 2009 Nov 03 Tue 7:38 pm

Re: parts for sale, trim, O/d tranny, doors etc.

Postby junk » 2009 Nov 05 Thu 9:37 pm

more pictures
Attachments
IMG_6752.JPG
IMG_6752.JPG (101.55 KiB) Viewed 18769 times
IMG_6753.JPG
IMG_6753.JPG (138.49 KiB) Viewed 18769 times
IMG_6746.JPG
IMG_6746.JPG (203.31 KiB) Viewed 18769 times
junk
 
Posts: 21
Joined: 2009 Nov 03 Tue 7:38 pm

Re: parts for sale, trim, O/d tranny, doors etc.

Postby hi-per al » 2009 Nov 07 Sat 10:18 pm

Jeremy...Thanx for the pics of the beltline stuff. Rear hatch look worse than mine. I will look at my stainless on Monday and see how it compares. My wagon is 45 miles away in a body shop. Yours looks fairly good. No major dents. What condition are the interior door panel stainless strips in? Thanx for the photos.

Hey Mike...Where do we stand on the bet? Missing the "one" but six letters are there.

Al
Live your Dreams
User avatar
hi-per al
 
Posts: 287
Joined: 2004 Dec 30 Thu 12:06 am
Location: Edmonton, Alberta, Canada

Re: parts for sale, trim, O/d tranny, doors etc.

Postby junk » 2009 Nov 08 Sun 6:53 am

Yeah the gate pieces had quite a few pits. If you didn't have a set they are there, but would need chromed for a show car. I can take a better look at the belt line trims and give you a run down of what I see. with their size it's hard to get a good picture showing the trim and enough detail.

The interior stainless pieces I thought looked good. I don't remember any big problems with them. I'd throw them in with the belt line trim if you want them.

Windshield - the outside stainless and inside mouldings will go with it.

I'm open for offers too on this stuff. I'd rather see it get used by someone than sit in my shed for years.

Just to let you guys know I'm traveling out of country for 2 weeks starting this week. I'll be back at Thanksgiving time. So I won't be able to ship any parts during that time. I'll still have email and such if you have questions.

Thanks,
Jeremy
junk
 
Posts: 21
Joined: 2009 Nov 03 Tue 7:38 pm

Re: parts for sale, trim, O/d tranny, doors etc.

Postby junk » 2009 Nov 08 Sun 9:00 pm

OK a couple more pictures of the transmission and shifter.
Attachments
IMG_6769.JPG
IMG_6769.JPG (147.56 KiB) Viewed 18737 times
IMG_6764.JPG
IMG_6764.JPG (149.03 KiB) Viewed 18739 times
junk
 
Posts: 21
Joined: 2009 Nov 03 Tue 7:38 pm

Re: parts for sale, trim, O/d tranny, doors etc.

Postby junk » 2009 Nov 11 Wed 8:14 am

Hey, I'm open to offers. What's it worth to you to have it sitting on the shelf for just in case? I would prefer someone get this stuff who could use it.

Also regarding the windshield I think it will ship for less than my 1st guesstimate. On packing and shipping I typically charge what it costs me to ship. I'm not trying to make money on shipping.

Thanks,
Jeremy
junk
 
Posts: 21
Joined: 2009 Nov 03 Tue 7:38 pm

Re: parts for sale, trim, O/d tranny, doors etc.

Postby Mike » 2009 Nov 15 Sun 6:07 pm

Hey Jeremy -

I appologize for not getting back to you sooner. My screwup.
I'm still waiting to find out if I have a $2,000 bill to spend on my motor cycle or not. I'm hoping with the demize of Buell, I can get a copy of their race exhaust system.

I don't know what to tell you right now. I want both.....but can hardly afford the exhaust, but if the oppertunatly arises, this is a once in a lifetime chance.
Then again...I know that a good windshield is TOO...!

I'm not worried about your packaging or shipping costs..

Question...will UPS deliver a package that big home...or will I have to pick it up? Any way you can find out?

Mike
User avatar
Mike
 
Posts: 685
Joined: 2004 Dec 18 Sat 3:28 pm
Location: So. Cal.

Re: parts for sale, trim, O/d tranny, doors etc.

Postby junk » 2009 Nov 16 Mon 8:15 am

No problem. I'm out of country right now until thanksgiving. I'm 95% sure that UPS will deliver a package that big to a house. I'll try to double check though, but probably won't be able to until thanksgiving.

Thanks,
Jeremy
junk
 
Posts: 21
Joined: 2009 Nov 03 Tue 7:38 pm

Re: parts for sale, trim, O/d tranny, doors etc.

Postby Mike » 2009 Nov 16 Mon 8:20 am

No problem.

Thanks.

Have a good holiday.

Mike
User avatar
Mike
 
Posts: 685
Joined: 2004 Dec 18 Sat 3:28 pm
Location: So. Cal.

Re: parts for sale, trim, O/d tranny, doors etc.

Postby junk » 2010 Apr 27 Tue 10:40 am

Hello,

I still have this stuff. Anyone need anything? I'm open to offers. I'd rather see it get used than scrapped.

Thanks,
jeremy
junk
 
Posts: 21
Joined: 2009 Nov 03 Tue 7:38 pm

PreviousNext

Return to ALL THINGS CONESTOGA

Who is online

Users browsing this forum: Google [Bot] and 23 guests

cron